Distributie via
DigiKey
Ontdek de catalogus
Assembly settings
Mechanische kenmerken
Terminal
PCB terminal

PCB terminal

kiezen...
  • 1.5 Series AMP Superseal 3 Pin Connector
  • Cable 200 mm, 180°
  • Cable 200 mm, 180°, Conntector M12
  • Cable 200 mm, 90°
  • Cable 200 mm, 90°, Connector M12
  • Connector M12
  • Connector M12 (5 pins)
  • Double plug-in terminal, 6.3 x 0.8 mm
  • Flat ribbon cable
  • Flat ribbon cable 300 mm
  • PCB terminal
  • Plug-in terminal
  • Plug-in terminal, 2 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.5 mm
  • Plug-in terminal, 2.8 x 0.8 mm
  • Plug-in terminal, 6.3 x 0.8 mm
  • Push-in terminal
  • Ring cable lug screw terminal
  • Screw terminal
  • Soldering terminal
  • Soldering terminal, 2.8 x 0.5 mm
  • Spring-type terminal
  • USB 3.0 socket type A-A
  • USB 3.0 socket type C-A
  • Universal soldering terminal
  • Universal terminal, 2 x 0.5 mm
Meer
Titel Accessory
PCB plug-in base

PCB plug-in base

kiezen...
  • Adaptor
  • Adaptor for housing, pole mounting 25 mm dia.
  • Adaptor for housing, pole mounting 30 mm dia.
  • Blind plug
  • Cable gland
  • Contact block locking pin
  • Contact bridge
  • Cover for locking device
  • Crimping tool
  • Diffuser
  • Diffusor cap
  • Diode block 1N4007
  • Dismantling tool
  • Dressing tool
  • E-stop protective shroud
  • EMC key protection cap
  • Enclosure
  • Enclosure cover monitoring
  • Extension plungers for push button with extended stroke
  • Faston terminals
  • Fixing nut
  • Flat receptacle
  • Front bezel
  • Front protective cap
  • Front protective ring
  • Hold-down unit
  • ID key
  • Illumination element, 24 V
  • Illumination element, 240 V
  • Insulation sleeve
  • Interlocking pin
  • Lamp remover
  • Lamp transformer 115/24 V
  • Lamp transformer 230/24 V
  • Lamp transformer 400/24 V
  • Lamp transformer 440/24 V
  • Legend frame
  • Legend plate
  • Lens remover
  • Light Tower Extension Pole
  • Light barrier
  • Locking ring wrench for screw gun
  • Locking device
  • Manual locking ring wrench
  • Marking foil
  • Mounting adapter
  • Mounting flange
  • Mounting plate
  • Mounting tool
  • Multi-plug housing
  • PCB plug-in base
  • Positioning insert for ant-twist protection
  • Protection cover
  • Protective cover
  • Protective shroud
  • Reducing ring
  • Reinforcement ring
  • Replacement Light Tower LED, BA15
  • Resistor block
  • Resistor-diode element
  • Series resistor
  • Snap-on base
  • Spare key
  • Spare key (key blank)
  • Terminal cover
  • Terminal marking - Not recommended for new design
  • Terminal plate empty
  • Test module
  • Tool set
  • Wall mounting kit
  • Wall-mounting bracket
Terug
Toon gedetailleerd productoverzicht
Distributie via
DigiKey
https://digikey.eao.com/component/61-9823/nl/...

PCB plug-in base

  • 61-9823

61-9823 PCB plug-in base, PCB terminal, Axial
61-9823
Component voor 11.82 USD
Toevoegen aan winkelwagentje
Uw product:
61-9823

61-9823

PCB plug-in base

11.82 USD6 in voorraad
Mechanische kenmerken
Terminal:
PCB terminal
Weight:
0.002 kg
Meer
Short Description:
PCB plug-in base, PCB terminal, Axial
Titel Accessory:
PCB plug-in base
Product attributes:
For slow-make switching element
Pins:
Axial
Component layouts:
Component layouts
A = PCB plug-in base
B = Terminals (rear side)
C = Drilling plan (component side)
D= Occupancy plan (component side)
E = Anti-rotation device
F = Positioning hole
Dimension drawings:
Dimension drawings
For Part No. 61-9823
Bestanden downloaden
Component voor 11.82 USD
Toevoegen aan winkelwagentje
Cookie toestemming
Onze website maakt gebruik van cookies. Voor meer informatie over cookies op deze website verwijzen wij u naar onze Privacybeleid en kunt u meer over ons lezen in de Legal Notice. U kunt de instellingen wijzigen in de Privacybeleid.
Accepteren
Afwijzen
Instellingen beheren